3pcs 12 Channels LED Sequencer/Chaser KT01 ***EXCLUSIVE***

Product Code: SEM001B
Brand: SpecialEffectsMagic
Weight: 72g
Product Condition: New
Product out of stock (Notify me when product is back in stock)

Note: This product has been discontinued and is replaced by the new and improved LED Magician V2.0
Please click here to see the new product.


Usual retail priced at $49.90 each, now you can get a set of 3pcs for the price of 2 at only $99.70! Limited time offer, while stock lasts!

Save $50 when you buy 3pcs of this item in a single order!




 Special Effects Magic's exclusive and hottest selling product! The KT01 LED Sequencer / Chaser is an LED running light generator that is easy to install and use. It's tiny form factor and design is ideal for all LED related installations such as on costumes, props, RC toys or even mods for your car! This is the product that adds blinking/fading/chasing sequences to your otherwise boring LED lights, it also works with any 9v - 24v lightings. With up to 500mA output across each of its 12 Channels, you can install up to 30 LEDs or a decent length of LED Strip light to each channel! 32 Different blinking/fading/running modes and 8 variable speeds are controlled by 4 buttons on the circuit board. It also features on-board LEDs that shows you your current running sequences and a smart microchip that "remembers" your last settings even after power-offs.

Unique Features:
  • Easy to install
  • Tiny in size! (2.5" x 1")
  • Requires only very basic technical knowledge! (ability to solder wires to it)
  • Input voltage = output voltage!
  • 12 output channels!
  • Output current of up to 0.5A (500mA) per channel!
  • 32 unique sequencers!
  • Includes chasing, blinking, fading sequence and more!
  • A mode that cycles through all the different sequences!
  • Adjustable speed! (8 different speed)
  • Does not require programming or any softwares etc.
  • Control using the 4 on-board buttons!
  • Low power consumption!
  • 12 tiny surface-mounted LEDs at the reverse side of the board shows you the current sequence!!
  • It "Remembers" your last setting even after power off!
  • One of the CHEAPEST priced LED sequencer you can find in the market!! 

Tiny LED Chaser/Sequencer KT01 12 Channels, 32 Modes, 8 variable speed (9v - 24v, 0.5A output x 12 Channels)

  • Easy to install & use, straightforward and doesn't require too deep a technical knowledge (Requires only basic soldering skill) 
  • 32 different chaser/blinking sequences x 8 Variable speed = 256 unique combinations (includes a mode that cycles through all 32 sequences) 
  • Up to 0.5A output per channel (500mA) x 12 channels! Enough to power a decent amount/length of LEDs/LED Strip at full brightness! 
  • Use ALL 12 channels or select any particular number of the channels to accomplish desired blinking effects! 
  • Tiny 12 Channels LED Sequencer ideal for LED projects such as LED Costume, set, Props, Car mods, RC Car/Plane/Helicopter, advertising displays or just simple DIY home installation projects. 
  • Low power consumption. High output. 
  • Wide range of acceptable voltage (9volts - 24volts) with same output voltage over 12 Channels, up to max of 0.5A per channel. 
  • Flexible voltage range allow powering via standard AA, AAA, C, D, 9v Battery, 12v battery or car battery (12-24v) 
  • Features built in non-volatile EEPROM, which "remembers" the last settings even after power-off. 
  • Small compact sized module measures only 6.5cm x 2.5cm. Ideal for projects that requires low profile circuitry. e.g. LED Costumes, RC Vehicle etc. 
  • 4 x on-board push-buttons controls sequences and speed (the circuit "remembers" your last setting even after power off). 
  • On the underside of the board are 12 surface-mounted LEDs to preview the running sequences without needing to connect to any external lights!

Click to Play!

Technical Specifications
Model no. KT01
Size: ~650mm(length) x 250mm(width) x 150mm(height)
Working voltage: DC 9volt - 24volt
Output channels: 12 channels
Output voltage: Same as input voltage
Output current: Max 0.5A (500mA)
Blinking sequences: pre-programed 32 modes with 8 variable speed
Type: Common Anode
Controls: via 4 x onboard push-buttons (2 for sequence, 2 for speed)
Circuit power consumption: <9mA @ 12v (without load)
Onboard LEDs: 12 x Surface mounted BLUE LEDs (as signal feedback)
Manufactured by: WT(W102v3)  

Download Manual for LED Sequencer KT01 HERE

Free worldwide shipping (2-4 weeks) applies for this product.
We HIGHLY RECOMMEND that you upgrade to registered airmail, trackable at $1.70, regardless of quantity
Upgrade option can be selected during checkout.

Please read our shipping FAQ before ordering.
This product will be shipped from our Singapore warehouse.

$99.70 inc. tax

Customer Reviews

No Reviews Posted Yet - be the first! (write review)

Product Added to your Cart

-------- OR --------